MultiRoombaRover/README.md

Multi Roomba Rover

a remake of my RoombaRover project with a decentralized and embedded approach supports multiple roombas

on each roomba:

• a raspberry pi zero 2 w
  • a raspberry pi camera
• roomba's serial port hooked up to the built in serial port on the raspberry pi

pi provisioning:

• enable serial port
• disable wifi powersave
• disable bluetooth

Repo layout

• pi/roverd: tiny Go daemon that bridges the Create 2 serial port, BRC pin, and the control server via WebSockets.
• server: Node.js process that terminates rover sockets, relays commands to/from the Socket.IO UI, and serves public/.
• pi/systemd / pi/mediamtx: ready-to-drop systemd units and a minimal mediaMTX config for WebRTC publishing (roverd can optionally supervise the mediamtx service).
• docs/pi-deployment.md: per-rover build + install instructions (cross-compiling on Fedora 43, deploying roverd + mediaMTX).

Quick start

# build the Pi agent (armv7)
cd pi/roverd
mkdir -p ../../dist
make pi-build

# start the server + UI
cd ../../server
npm install
npm run start

Need a fake rover or multi-rover testing without hardware? Use the dummy build:

cd pi/roverd
mkdir -p ../../dist
make dummy
./../../dist/roverd-dummy -config ./roverd.sample.yaml

The dummy binary connects to the Node server, emits simulated sensor frames, and logs every command it receives, so you can spin up as many virtual rovers as you’d like on your dev machine.

Deploy a rover by copying the repo + dist/roverd to the Pi and running the helper (it will also fetch mediaMTX when --mediamtx is set):

cd ~/MultiRoombaRover
sudo ./pi/install_roverd.sh --mediamtx

Then point each rover's /etc/roverd.yaml at ws://<server>:8080/rover, enable the sensor stream from the UI, and drive with WASD. Use the “Restart Camera” button if you enable media management so roverd can bounce the mediamtx service remotely. Heads-up: the BRC pulser now uses libgpiod; make sure the roverd service account is in the gpio group (or otherwise allowed to access /dev/gpiochip*) and set brc.gpioChip if your hardware exposes a different chip name.