profile cleanups

This commit is contained in:
legop3
2026-11-17 21:06:47 -05:00
parent dcc14388a6
commit 970063987a
3 changed files with 9 additions and 33 deletions
+2 -9
View File
@@ -2,9 +2,7 @@
name: ALSA microphone
description: Uses the configured audio input device through roverd's ALSA conversion route.
setup: |
if ! command -v ffmpeg >/dev/null || ! command -v arecord >/dev/null; then
apt-get update && apt-get install -y ffmpeg alsa-utils
fi
apt-get update && apt-get install -y ffmpeg alsa-utils
run: |
sample_rate=48000
channels=2
@@ -20,9 +18,6 @@
description: HAT capture with S32_LE input, 20 dB microphone boost, and low-latency Opus settings. Reboot once after first enabling its hardware.
setup: |
set -euo pipefail
# Capture/playback setup may run concurrently; serialize edits to boot config.
exec 9>/var/lock/roverd-aiy.lock
flock 9
boot=/boot/firmware/config.txt
[[ -f "$boot" ]] || boot=/boot/config.txt
[[ -f "$boot" ]] || { echo 'AIY setup needs a Raspberry Pi boot config.txt' >&2; exit 1; }
@@ -38,9 +33,7 @@
if [[ "$changed" == 1 ]]; then
echo 'AIY hardware enabled. Reboot the host once before using this sound card.'
fi
if ! command -v ffmpeg >/dev/null || ! command -v arecord >/dev/null; then
apt-get update && apt-get install -y ffmpeg alsa-utils
fi
apt-get update && apt-get install -y ffmpeg alsa-utils
run: |
sample_rate=48000
channels=2
+2 -9
View File
@@ -2,9 +2,7 @@
name: ALSA speaker
description: Uses the configured output alongside TTS and horn with independent volume controls.
setup: |
if ! command -v ffmpeg >/dev/null || ! command -v aplay >/dev/null; then
apt-get update && apt-get install -y ffmpeg alsa-utils
fi
apt-get update && apt-get install -y ffmpeg alsa-utils
run: |
normalize=true
normalize_filter='dynaudnorm=f=75:g=15:m=10:p=0.9,alimiter=limit=0.85:level=disabled'
@@ -19,9 +17,6 @@
description: HAT playback with low-latency decoding and 16 kHz mono output through the configured audio route. Reboot once after initial setup.
setup: |
set -euo pipefail
# Capture/playback setup may run concurrently; serialize edits to boot config.
exec 9>/var/lock/roverd-aiy.lock
flock 9
boot=/boot/firmware/config.txt
[[ -f "$boot" ]] || boot=/boot/config.txt
[[ -f "$boot" ]] || { echo 'AIY setup needs a Raspberry Pi boot config.txt' >&2; exit 1; }
@@ -37,9 +32,7 @@
if [[ "$changed" == 1 ]]; then
echo 'AIY hardware enabled. Reboot the host once before using this sound card.'
fi
if ! command -v ffmpeg >/dev/null || ! command -v aplay >/dev/null; then
apt-get update && apt-get install -y ffmpeg alsa-utils
fi
apt-get update && apt-get install -y ffmpeg alsa-utils
run: |
normalize=true
normalize_filter='dynaudnorm=f=75:g=15:m=10:p=0.9,alimiter=limit=0.85:level=disabled'
+5 -15
View File
@@ -2,7 +2,7 @@
name: V4L2 camera
description: USB or other Linux V4L2 camera, encoded with software H.264.
setup: |
command -v ffmpeg >/dev/null || { apt-get update && apt-get install -y ffmpeg; }
apt-get update && apt-get install -y ffmpeg
run: |
device=/dev/video0
input_format=mjpeg
@@ -23,26 +23,16 @@
-g "$fps" -keyint_min "$fps" -sc_threshold 0 -flush_packets 1 -muxdelay 0 -muxpreload 0 \
-f rtsp -rtsp_transport tcp "$ROVER_VIDEO_PUBLISH_URL"
- id: rpicam
name: Raspberry Pi CSI camera
description: rpicam/libcamera H.264 output, republished through ffmpeg.
name: Pi Zero 2 W Camera v2
description: Inverted Camera Module v2 on a Pi Zero 2 W, with H.264 republished through ffmpeg.
setup: |
command -v ffmpeg >/dev/null || { apt-get update && apt-get install -y ffmpeg; }
if ! command -v rpicam-vid >/dev/null && ! command -v libcamera-vid >/dev/null; then
apt-get update
apt-get install -y rpicam-apps
fi
apt-get update && apt-get install -y ffmpeg rpicam-apps
run: |
width=640
height=480
fps=30
bitrate=2000000
inverted=true
sensor_mode=1296:972
camera=$(command -v rpicam-vid || command -v libcamera-vid)
options=()
if [ "$inverted" = true ]; then options+=(--rotation 180); fi
if [ -n "$sensor_mode" ]; then options+=(--mode "$sensor_mode"); fi
"$camera" --inline --timeout 0 "${options[@]}" \
rpicam-vid --inline --timeout 0 --rotation 180 --mode 1296:972 \
--width "$width" --height "$height" \
--framerate "$fps" --bitrate "$bitrate" \
--codec h264 --intra 120 --profile baseline --denoise auto --nopreview \