streamer movement

This commit is contained in:
legop3
2026-11-16 22:59:38 -05:00
parent b0de727d3e
commit 91c9194856
52 changed files with 909 additions and 2518 deletions
+34
View File
@@ -0,0 +1,34 @@
- id: alsa
name: ALSA microphone
description: Uses the configured audio input device through roverd's ALSA conversion route.
setup: |
if ! command -v ffmpeg >/dev/null || ! command -v arecord >/dev/null; then
apt-get update && apt-get install -y ffmpeg alsa-utils
fi
run: &run |
exec ffmpeg -nostdin -f alsa -ar "$ROVER_AUDIO_SAMPLE_RATE" -ac "$ROVER_AUDIO_CHANNELS" -i "$ROVER_AUDIO_INPUT_DEVICE" -c:a libopus -b:a "$ROVER_AUDIO_BITRATE" -f rtsp -rtsp_transport tcp "$ROVER_AUDIO_PUBLISH_URL"
- id: aiy
name: Google AIY Voice HAT microphone
description: Same configurable ALSA route; setup enables the HAT overlay. Reboot once after first enabling its hardware.
setup: |
set -euo pipefail
# Capture/playback setup may run concurrently; serialize edits to boot config.
exec 9>/var/lock/roverd-aiy.lock
flock 9
boot=/boot/firmware/config.txt
[[ -f "$boot" ]] || boot=/boot/config.txt
[[ -f "$boot" ]] || { echo 'AIY setup needs a Raspberry Pi boot config.txt' >&2; exit 1; }
changed=0
for setting in dtparam=i2s=on dtoverlay=googlevoicehat-soundcard; do
if ! grep -Fxq "$setting" "$boot"; then
printf '\n%s\n' "$setting" >> "$boot"
changed=1
fi
done
if [[ "$changed" == 1 ]]; then
echo 'AIY hardware enabled. Reboot the host once before using this sound card.'
fi
if ! command -v ffmpeg >/dev/null || ! command -v aplay >/dev/null; then
apt-get update && apt-get install -y ffmpeg alsa-utils
fi
run: *run
+36
View File
@@ -0,0 +1,36 @@
- id: alsa
name: ALSA speaker
description: Uses the configured output alongside TTS and horn with independent volume controls.
setup: |
if ! command -v ffmpeg >/dev/null || ! command -v aplay >/dev/null; then
apt-get update && apt-get install -y ffmpeg alsa-utils
fi
run: &run |
filters=()
if [ "$ROVER_AUDIO_NORMALIZE" = true ]; then filters=(-af "$ROVER_AUDIO_NORMALIZE_FILTER"); fi
exec ffmpeg -nostdin -rtsp_transport tcp -i "$ROVER_AUDIO_PLAYBACK_URL" -vn "${filters[@]}" -f alsa "$ROVER_AUDIO_OUTPUT_DEVICE"
- id: aiy
name: Google AIY Voice HAT speaker
description: Enables the HAT hardware; uses the same configured ALSA routing as other devices. Reboot once after initial setup.
setup: |
set -euo pipefail
# Capture/playback setup may run concurrently; serialize edits to boot config.
exec 9>/var/lock/roverd-aiy.lock
flock 9
boot=/boot/firmware/config.txt
[[ -f "$boot" ]] || boot=/boot/config.txt
[[ -f "$boot" ]] || { echo 'AIY setup needs a Raspberry Pi boot config.txt' >&2; exit 1; }
changed=0
for setting in dtparam=i2s=on dtoverlay=googlevoicehat-soundcard; do
if ! grep -Fxq "$setting" "$boot"; then
printf '\n%s\n' "$setting" >> "$boot"
changed=1
fi
done
if [[ "$changed" == 1 ]]; then
echo 'AIY hardware enabled. Reboot the host once before using this sound card.'
fi
if ! command -v ffmpeg >/dev/null || ! command -v aplay >/dev/null; then
apt-get update && apt-get install -y ffmpeg alsa-utils
fi
run: *run
+25
View File
@@ -0,0 +1,25 @@
- id: v4l2
name: V4L2 camera
description: USB or other Linux V4L2 camera, encoded with software H.264.
setup: |
command -v ffmpeg >/dev/null || { apt-get update && apt-get install -y ffmpeg; }
run: |
filters=()
if [ "$ROVER_VIDEO_INVERTED" = true ]; then filters=(-vf hflip,vflip); fi
exec ffmpeg -nostdin -f v4l2 -input_format "$ROVER_VIDEO_INPUT_FORMAT" -video_size "${ROVER_VIDEO_WIDTH}x${ROVER_VIDEO_HEIGHT}" -framerate "$ROVER_VIDEO_FPS" -i "$ROVER_VIDEO_DEVICE" "${filters[@]}" -an -c:v libx264 -preset ultrafast -tune zerolatency -pix_fmt yuv420p -b:v "$ROVER_VIDEO_BITRATE" -f rtsp -rtsp_transport tcp "$ROVER_VIDEO_PUBLISH_URL"
- id: rpicam
name: Raspberry Pi CSI camera
description: rpicam/libcamera H.264 output, republished through ffmpeg.
setup: |
command -v ffmpeg >/dev/null || { apt-get update && apt-get install -y ffmpeg; }
if ! command -v rpicam-vid >/dev/null && ! command -v libcamera-vid >/dev/null; then
apt-get update
apt-get install -y rpicam-apps
fi
run: |
camera=$(command -v rpicam-vid || command -v libcamera-vid)
options=()
if [ "$ROVER_VIDEO_INVERTED" = true ]; then options+=(--hflip --vflip); fi
if [ -n "$ROVER_VIDEO_SENSOR_MODE" ]; then options+=(--mode "$ROVER_VIDEO_SENSOR_MODE"); fi
"$camera" --timeout 0 --nopreview --inline --codec h264 --width "$ROVER_VIDEO_WIDTH" --height "$ROVER_VIDEO_HEIGHT" --framerate "$ROVER_VIDEO_FPS" --bitrate "$ROVER_VIDEO_BITRATE" "${options[@]}" -o - |
ffmpeg -nostdin -fflags +genpts -f h264 -i pipe:0 -c:v copy -an -f rtsp -rtsp_transport tcp "$ROVER_VIDEO_PUBLISH_URL"