profile updates
Container image / image (push) Failing after 59s

This commit is contained in:
legop3
2026-11-17 21:14:02 -05:00
parent 970063987a
commit 59911c1aae
3 changed files with 24 additions and 12 deletions
+8 -4
View File
@@ -1,8 +1,10 @@
- id: alsa - id: alsa
name: ALSA microphone name: ALSA microphone (generic)
description: Uses the configured audio input device through roverd's ALSA conversion route. description: Uses the configured audio input device through roverd's ALSA conversion route.
setup: | setup: |
apt-get update && apt-get install -y ffmpeg alsa-utils if ! command -v ffmpeg >/dev/null || ! command -v arecord >/dev/null; then
apt-get update && apt-get install -y ffmpeg alsa-utils
fi
run: | run: |
sample_rate=48000 sample_rate=48000
channels=2 channels=2
@@ -14,7 +16,7 @@
-application audio -frame_duration 20 -compression_level 0 \ -application audio -frame_duration 20 -compression_level 0 \
-flush_packets 1 -muxdelay 0 -muxpreload 0 -f rtsp -rtsp_transport tcp "$ROVER_AUDIO_PUBLISH_URL" -flush_packets 1 -muxdelay 0 -muxpreload 0 -f rtsp -rtsp_transport tcp "$ROVER_AUDIO_PUBLISH_URL"
- id: aiy - id: aiy
name: Google AIY Voice HAT microphone name: Google AIY Voice HAT microphone (raspberry pi)
description: HAT capture with S32_LE input, 20 dB microphone boost, and low-latency Opus settings. Reboot once after first enabling its hardware. description: HAT capture with S32_LE input, 20 dB microphone boost, and low-latency Opus settings. Reboot once after first enabling its hardware.
setup: | setup: |
set -euo pipefail set -euo pipefail
@@ -33,7 +35,9 @@
if [[ "$changed" == 1 ]]; then if [[ "$changed" == 1 ]]; then
echo 'AIY hardware enabled. Reboot the host once before using this sound card.' echo 'AIY hardware enabled. Reboot the host once before using this sound card.'
fi fi
apt-get update && apt-get install -y ffmpeg alsa-utils if ! command -v ffmpeg >/dev/null || ! command -v arecord >/dev/null; then
apt-get update && apt-get install -y ffmpeg alsa-utils
fi
run: | run: |
sample_rate=48000 sample_rate=48000
channels=2 channels=2
+8 -4
View File
@@ -1,8 +1,10 @@
- id: alsa - id: alsa
name: ALSA speaker name: ALSA speaker (generic)
description: Uses the configured output alongside TTS and horn with independent volume controls. description: Uses the configured output alongside TTS and horn with independent volume controls.
setup: | setup: |
apt-get update && apt-get install -y ffmpeg alsa-utils if ! command -v ffmpeg >/dev/null || ! command -v aplay >/dev/null; then
apt-get update && apt-get install -y ffmpeg alsa-utils
fi
run: | run: |
normalize=true normalize=true
normalize_filter='dynaudnorm=f=75:g=15:m=10:p=0.9,alimiter=limit=0.85:level=disabled' normalize_filter='dynaudnorm=f=75:g=15:m=10:p=0.9,alimiter=limit=0.85:level=disabled'
@@ -13,7 +15,7 @@
-vn "${filters[@]}" -ac 1 -ar 16000 -f s16le pipe:1 | -vn "${filters[@]}" -ac 1 -ar 16000 -f s16le pipe:1 |
aplay -q -D "$ROVER_AUDIO_OUTPUT_DEVICE" -t raw -f S16_LE -r 16000 -c 1 aplay -q -D "$ROVER_AUDIO_OUTPUT_DEVICE" -t raw -f S16_LE -r 16000 -c 1
- id: aiy - id: aiy
name: Google AIY Voice HAT speaker name: Google AIY Voice HAT speaker (raspberry pi)
description: HAT playback with low-latency decoding and 16 kHz mono output through the configured audio route. Reboot once after initial setup. description: HAT playback with low-latency decoding and 16 kHz mono output through the configured audio route. Reboot once after initial setup.
setup: | setup: |
set -euo pipefail set -euo pipefail
@@ -32,7 +34,9 @@
if [[ "$changed" == 1 ]]; then if [[ "$changed" == 1 ]]; then
echo 'AIY hardware enabled. Reboot the host once before using this sound card.' echo 'AIY hardware enabled. Reboot the host once before using this sound card.'
fi fi
apt-get update && apt-get install -y ffmpeg alsa-utils if ! command -v ffmpeg >/dev/null || ! command -v aplay >/dev/null; then
apt-get update && apt-get install -y ffmpeg alsa-utils
fi
run: | run: |
normalize=true normalize=true
normalize_filter='dynaudnorm=f=75:g=15:m=10:p=0.9,alimiter=limit=0.85:level=disabled' normalize_filter='dynaudnorm=f=75:g=15:m=10:p=0.9,alimiter=limit=0.85:level=disabled'
+8 -4
View File
@@ -1,8 +1,10 @@
- id: v4l2 - id: v4l2
name: V4L2 camera name: V4L2 camera (generic, NO hardware encoding, only use for testing...)
description: USB or other Linux V4L2 camera, encoded with software H.264. description: USB or other Linux V4L2 camera, encoded with software H.264.
setup: | setup: |
apt-get update && apt-get install -y ffmpeg if ! command -v ffmpeg >/dev/null; then
apt-get update && apt-get install -y ffmpeg
fi
run: | run: |
device=/dev/video0 device=/dev/video0
input_format=mjpeg input_format=mjpeg
@@ -23,10 +25,12 @@
-g "$fps" -keyint_min "$fps" -sc_threshold 0 -flush_packets 1 -muxdelay 0 -muxpreload 0 \ -g "$fps" -keyint_min "$fps" -sc_threshold 0 -flush_packets 1 -muxdelay 0 -muxpreload 0 \
-f rtsp -rtsp_transport tcp "$ROVER_VIDEO_PUBLISH_URL" -f rtsp -rtsp_transport tcp "$ROVER_VIDEO_PUBLISH_URL"
- id: rpicam - id: rpicam
name: Pi Zero 2 W Camera v2 name: Pi Zero 2 W Camera v2 (Carpet's Rovers)
description: Inverted Camera Module v2 on a Pi Zero 2 W, with H.264 republished through ffmpeg. description: Inverted Camera Module v2 on a Pi Zero 2 W, with H.264 republished through ffmpeg.
setup: | setup: |
apt-get update && apt-get install -y ffmpeg rpicam-apps if ! command -v ffmpeg >/dev/null || ! command -v rpicam-vid >/dev/null; then
apt-get update && apt-get install -y ffmpeg rpicam-apps
fi
run: | run: |
width=640 width=640
height=480 height=480