mirror of
https://github.com/legop3/MultiRoombaRover.git
synced 2026-11-17 04:02:21 -05:00
cleanups
This commit is contained in:
@@ -8,7 +8,7 @@ https://rover.otter.land
|
||||
|
||||
## This guide is a work in progress, it will cover:
|
||||
- Building rovers
|
||||
- Installing roverd on a rover's raspberry pi
|
||||
- Installing roverd on a Debian-based rover computer
|
||||
- Setting up the server
|
||||
- Configuration
|
||||
|
||||
@@ -17,6 +17,8 @@ You WILL need some common hobby electronics knowledge to build one of these, I w
|
||||
|
||||
### Parts per rover
|
||||
|
||||
This parts list describes my Pi/AIY build. Roverd also supports other Linux hosts and configurable camera/audio devices.
|
||||
|
||||
| Part | Notes |
|
||||
| --- | --- |
|
||||
| Create 2 compatible Roomba with the mini DIN port | Tested only with 600 series Roombas, your mileage may vary with newer models |
|
||||
@@ -28,7 +30,7 @@ You WILL need some common hobby electronics knowledge to build one of these, I w
|
||||
| A good wifi adapter | Has to work with Linux 6.12 (I use ones with the MT7921AU chipset and they work great), ideally wifi 6 with MU-MIMO if you are running multiple rovers on one AP. The built in wifi on the pi zero 2 W is NOT good enough for this. |
|
||||
| A USB hub hat (if using a pi zero) | If you are using a raspberry pi zero, you will want a USB hub hat for your wifi adapter, I would not recommend using an OTG adapter as it may not provide enough power. |
|
||||
| ----CAMERA STUFF---- | ----Below here is all camera related things that youll need---- |
|
||||
| A pi camera v2 (ov5647) | The video publisher in this project is only designed for the ov5647, though it would be totally possible to make your own publisher for other sensors. |
|
||||
| A compatible camera | Select the rpicam profile for a Raspberry Pi CSI camera or V4L2 for a USB camera. Custom profiles can use other capture/encoder commands. |
|
||||
| Cheap 5v servo | Unless you have a VERY wide camera lens, you will want to have a servo plugged into the pi to be able to tilt the camera up and down. |
|
||||
| LED for toggling the headlight | I use white LEDs attached to one of the "driver" pins on the AIY hat to trick one of those generic pi camera LED floodlights into turning on / off on demand.|
|
||||
| Optional laser pointer | A laser pointer can be wired to another high-current-capable GPIO driver, with GPIO 27 used by default in the rover config. |
|
||||
|
||||
Reference in New Issue
Block a user